Ron 2150 Hook Type
Crane Scale with 2" Attachable Display

Advantages

Description

RON 2150 Hook Type is a unique electronic Crane Scale with large 2” / 50mm removable display.

The removable display enables the user either to hold the large indicator in his hand or snap it very easily onto the load cell.

By this means, the user's personal safety is ensured, as under no circumstances will he have to approach the load in order to read the result: he will either hold the remote load indicator in his hand or read the large display from a safe distance.

The separation of hanging Load Cells and displays also increases the systems’ durability.

The small Crane Scales’ hanging Load Cells ensure low headroom loss for any below hook weighing or load measurement application.

RON electronic Crane Scale, Dynamometer and Load Cell series are used for force measurement, below hook weighing during lifting, overload prevention and load measurement.

2000 hour battery life - applicable to all RON crane scale, dynamometer and load cell series and load cells with built-in amplifier:

RON Crane Scales excel in high quality, are based on the latest technologies and comply with the strictest safety standards.

All RON Crane Scales are made of the highest quality, aerospace steel.

All RON Crane Scales hanging Load Cells and Dynamometers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.

Specifications				Options
Safety Factor : Designed to 5:1 for the load cell and the lifting eye. Average straightening load of the hook is at least 4 times the capacity. Proof Load : Each system proof-loaded to 200% of capacity (certified) up to a test force of 400t. Accuracy : ± 0.1% of full range. Durability : Robust extruded aluminum indicator housing, iridized and polyurethane coated. Display : 5 digit, 2" (50mm) liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep state, charge, and programming instructions. Standard number of measurements per second: 1. Functions : Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload visual alarms. User calibration. Sleep mode after 60 sec. in zero value, awakes automatically when loaded.		Units : available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs, newtons, deca newtons, k. newtons. Load Cell Material : Made of high-strength, aerospace quality, alloy steel, polyurethane coated. Indicator Material : Extruded aluminum. Power : 3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries. Batteries rated 3AH will function for at least 2000 hours (at least three months of continuous working). Occasional use will extend the life of the batteries, up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off. Cable : Supplied with 16' / 5m cable. Calibration : User calibration. Initial factory calibration, fully traceable (certified). Temperature Range : -15°F to +175°F (-25°C to +80°C). Environmental : Weatherproof, NEMA 4, IP65.		1 or 2 user-adjustable set points Additional 2"/50mm LCD display with cable connection to indicator Additional 4"/100mm LED display with cable connection to indicator Additional spare cable in 15ft/5m increments Analog output: 0 to 1V/0 to 2V/0 to 3V Analog output: 4 to 20 mA Baud rate, user-selectable Dampened (average) display for unstable load Data logger – up to 600 measurements Data logger – up to 3000 measurements Data logger – up to 6000 measurements Fatigue rated load cell IP 67 load cell with special off-shore connectors Longer extension cable in 15ft/5m increments Number of measurements per second: 2/3/4/5/6/7/8/20/30, factory set Real-time clock Rechargeable batteries with an external charger for charging the batteries inside the system RS-232 - continuous or on demand data output, user-selectable RS-485 - continuous or on demand data output, user-selectable Totalizer Units, user-selectable Wireless (R.F.) data transmission * Acrobat 7 (and up) required. If you do not have the correct version, please click on the following link to download Download Acrobat

Shank Hook Version

* This capacity is equipped with: 1) Shackle instead of lifting eye. 2) Eye hook instead of shank hook. The company reserves the right to make changes without notice.
	* Acrobat 7 (and up) required. If you do not have the correct version, please click on the following link to download Download Acrobat

Back to top

Applications

Multi-cell up to 96 load cells on laptop and PDA
Aerospace	Weighing during manufacturing	Shipment weighing	Overload prevention
Destruction tests	Monitoring	Proof tests	Additonal Applications