Technical specifications, drawing and dimensions table (scroll further down)


RON 2125 Hook Type Portable Digital Crane Scale is a unique Portable Crane Scale with hand-held remote display that up to 12.5 tons capacity is removable and can be attached to the load cell. The removable display enables the user either to hold the large indicator in his hand or snap it very easily onto the load cell.

By this means, the user's personal safety is ensured as under no circumstances will he have to approach the load in order to read the result: he will either hold the remote indicator in his hand or read the large portable crane scale display from a safe distance.

The separation of load cells and displays also increases portable Crane Scale durability.

The small load cells of the portable digital Crane Scales ensure portability and low headroom loss for any application.

RON 2125 Hook Type Portable Digital Crane Scale has many functions and features as described below.

Portable digital Crane Scales, Dynamometers and Load Cells, are used for weighing during lifting, as well as force, load and tension measurement.

All portable Crane Scales are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.

2000 hour battery life - applicable to all RON crane scale, dynamometer and load cell series and load cells with built-in amplifier:

RON Crane Scales excel in high quality, are based on the latest technologies and comply with the strictest safety standards.

All RON Crane Scales are made of the highest quality, aerospace steel.






Shackles not included
Removable display
up to 12.5 ton capacity

Specifications

Options
Safety Factor : Designed to 5:1, for the load cell and the lifting eye. Average straightening load of the hook is at least 4 times the capacity.

Proof Load : Each system proof-loaded to 200% of capacity (certified) up to a test force of 400t.

Accuracy : ± 0.1% of full range.

Durability : Robust extruded aluminum indicator housing, iridized and polyurethane coated.

Display : 5 digit, 1" (25mm) liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep state, charge, and programming instructions. Standard number of measurements per second: 1.

Functions : Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload visual alarms. User calibration. Sleep mode after 60 sec. in zero value, awakes automatically when loaded. 		Units : available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs, newtons, deca newtons, k. newtons.

Load Cell Material : Made of high-strength, aerospace quality, alloy steel, polyurethane coated.

Indicator Material : Extruded aluminum.

Power : 3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries. Batteries rated 3AH will function for at least 2000 hours (at least three months of continuous working). Occasional use will extend the life of the batteries, up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off.ined at power off.

Cable : Supplied with 16' / 5m cable.

Calibration : User calibration. Initial factory calibration, fully traceable (certified).

Temperature Range : -15°F to +175°F
(-25°C to +80°C).

Environmental : Weatherproof, NEMA 4, IP65. 		1 or 2 user-adjustable set points
Additional 2"/50mm LCD display with cable connection to indicator
Additional 4"/100mm LED display with cable connection to indicator
Additional spare cable in 15ft/5m increments
Analog output: 0 to 1V/0 to 2V/0 to 3V
Analog output: 4 to 20 mA
Baud rate, user-selectable
Dampened (average) display for unstable load
Data logger – up to 600 measurements
Data logger – up to 3000 measurements
Data logger – up to 6000 measurements
Fatigue rated load cell
IP 67 load cell with special off-shore connectors
Longer extension cable in 15ft/5m increments
Number of measurements per second: 2/3/4/5/6/7/8/20/30, factory set
Real-time clock
Rechargeable batteries, with an external charger for charging the batteries inside the system
RS-232 - continuous or on demand data output, user-selectable
RS-485 - continuous or on demand data output, user-selectable
Totalizer
Units, user-selectable
RON 2125 - H
15.08.07

Cat no.

Cap.

Resolution

A

B

C

Ø D

E

H

tons

kgs

lbs

mm

inch

mm

inch

mm

inch

mm

inch

mm

inch

mm

inch

H-005#

0.5

0.2

0.5

51

2

38

1.5

31

1.25

13

0.5

25

1

300

11.88

H-01#

1

0.5

1

38

1.5

31

1.25

31

1.25

10

0.38

22

0.88

300

11.88

H-0125#

1.25

0.5

1

51

2

38

1.5

31

1.25

13

0.5

25

1

300

11.88

H-016#

1.6

1

2

51

2

38

1.5

31

1.25

13

0.5

25

1

300

11.88

H-025

2.5

1

2

67

2.63

51

2

29

1.13

19

0.75

29

1.13

290

11.5

H-03

3

1

2

67

2.63

51

2

29

1.13

19

0.75

29

1.13

290

11.5

H-032

3.2

2

5

67

2.63

51

2

29

1.13

19

0.75

29

1.13

290

11.5

H-05

5

2

5

89

3.5

63

2.5

37

1.5

25

1

37

1.44

330

13

H-10

10

5

10

102

4

78

3.13

57

2.25

32

1.25

57

2.25

480

19

H-12*

12

5

10

98

3.8

82

3.2

64

2.5

32

1.2

56

2.2

528

20.8

H-15*

15

5

10

112

4.4

88

3.5

72

2.8

35

1.4

60

2.4

566

22.3

H-20*

20

10

20

137

5.3

111

4.3

79

3.1

41

1.6

71

2.8

621

24.5

H-25*

25

10

20

169

6.6

146

5.7

99

3.9

51

2

86

3.4

744

29.3

H-30*

30

10

20

169

6.6

146

5.7

99

3.9

51

2

86

3.4

744

29.3

H-32*

32

20

50

169

6.6

146

5.7

99

3.9

51

2

86

3.4

744

29.3



# This capacity is equipped with two-link chain between load cell and chain hook.

* This capacity is equipped with:
1) Shackle instead of lifting eye.
2) Eye hook instead of shank hook.
The company reserves the right to make changes without notice.